info@kwadrant-ia.nl

Response within 24h

+31 (0)33 299 60 57

Get immediate response

Yacht 55

Navigate to

Outdoor Panel Construction

Outdoor control cabinet, fully assembled for outdoor installation

Control cabinets that can remain outdoors for years without condensation, overheating, or corrosion.

An outdoor enclosure is more than just a waterproof housing

An outdoor control cabinet is a control or distribution cabinet designed for outdoor installation, with an enclosure, sealing, and climate control that can withstand rain, sun, frost, and moisture. Kwadrant IA supplies outdoor enclosures as a complete package: enclosure, engineering, components, wiring, and a Factory Acceptance Test.

The difference between a cabinet that lasts ten years and one that starts malfunctioning after two winters rarely lies in the cabinet itself. It lies in the feed-throughs, the climate control, and the way the cabinet is installed. We make those decisions during the design phase, not afterward, as part of our panel fabrication process.

Five Design Choices for a Reliable Outdoor Enclosure

These five points determine whether an outdoor enclosure will remain dry, cool, and intact. We include them in the specifications before construction begins.

IP and IK Ratings

IP66 is the standard for outdoor use: dustproof and resistant to powerful water jets. In areas where there is a risk of impact or vandalism, we also select a high IK rating for the housing and the viewing window.

Condensation Control

Temperature fluctuations between day and night can cause condensation in a sealed cabinet. A pressure equalization device, cabinet heater, and humidistat keep the interior dry. See “Preventing Condensation in a Control Cabinet.”

Heat and Solar Radiation

A cabinet exposed to the sun heats up, even without an internal heat load. A sunroof with ventilation space, a light color, and active cooling where necessary keep the internal temperature within the components’ operating limits. See “Calculating Control Cabinet Cooling.”

Materials

Powder-coated steel for sheltered locations, polyester for light-duty applications, 304 or 316L stainless steel for heavy-duty or corrosive environments. See custom stainless steel control cabinets and 316 stainless steel for corrosion class C5.

Setup and Implementation

A base or foundation frame keeps the cabinet free from splashing water and provides space for cable entry. All cable entries are located at the bottom, so water cannot run inside along the cables.

Want to have an outdoor cabinet built?

Please send us your specifications or schedule a technical consultation. You will receive a quote with a detailed breakdown within five business days.

Uses of Outdoor Cabinets

Whenever there isn’t enough space inside to house the control system, we mount the enclosure on the surrounding structure.

01

Water Management and Pumping Stations

Pumping stations, sewage pumping stations, and weirs are, by definition, located outdoors, often in a damp and corrosive environment. Control System for Pumping Stations

02

Infra

Bridges, locks, and tunnels, where malfunctions have an immediate impact on traffic and safety. Panel construction for infra

03

Energy Storage

Battery systems and charging infrastructure housed in containers or installed outdoors, with a high heat load. Control Cabinet for BESS

04

Industry and Tank Storage

Outdoor installations at tank farms and facilities, sometimes in areas at risk of explosion. Panel construction for petrochemicals

Years of experience in the field of industrial automation

Satisfied customers
0 +
Panels built
0 +
Years of experience
0 +

Fully assembled and tested

We do not supply an empty enclosure, but rather an outdoor enclosure that is ready for connection.

  • Engineering in EPLAN, including thermal calculations
  • Custom enclosure with cutouts for cable entries and climate control
  • Design in accordance with NEN-EN-IEC 61439 or NEN-EN-IEC 60204-1
  • FAT in our workshop and a complete file
  • If desired, on-site installation and connection by our installation and cabling team
Contact

Start your project with a technical consultation

Do you have an issue around panel building or industrial automation? We like to think with you from the initial design phase to realization and commissioning. Get in touch and discuss your project with one of our specialists.

Technical consultation

Direct contact with a specialist.

Quick follow-up

A substantive response within a short time.

Clear approach

From inventory to technical development.

Contact formulier EN (#7)

Industrial automation with international standards

Industrial automation requires more than just a correctly constructed panel. We start with the architecture of the system and make conscious choices in component selection, standardization and scalability. By fully mastering engineering, panel construction and integration, we realize control systems that perform reliably in demanding industrial environments. From modular construction to international compliance, every detail is focused on quality, longevity and manageable Total Cost of Ownership.

We do not build standard solutions, but technically sound systems that match the complexity of modern mechanical engineering.

Frequently Asked Questions About Outdoor Electrical Panels

For outdoor installation, IP66 is the standard. It is important to note that the IP rating applies to the entire enclosure—including cable glands, cooling systems, and viewing windows—not just the empty enclosure.

Featuring a pressure-equalizing element that prevents moisture from entering during temperature fluctuations, supplemented by a cabinet heater and a hygrostat that maintain the internal temperature above the dew point.

That depends on the heat load inside and the solar radiation outside. We use a heat calculation to determine in advance whether a solar roof and passive ventilation will suffice or whether active cooling is necessary.

Powder-coated steel for sheltered locations, polyester for small cabinets with low mechanical stress, and stainless steel for harsh, wet, or corrosive environments such as coastal areas or wastewater treatment plants.

No. We supply complete control and distribution panels, including engineering, components, wiring, and testing.

Within five business days of receiving a complete application, including a detailed cost estimate.